General Safety Tests (all appliances)

Safety Icon
Earth Loop Test
Confirm circuit protection is within safe parameters.
Insulation Resistance Test
Verify insulation is intact between live parts and earth.
Earth Continuity Test
Confirm exposed conductive parts are correctly earthed.
Visual inspection of power cord, plug, and socket
Look for wear, overheating, or damage.

Washing Machines

Washing Machine
Inspect door seal for wear, mould, and leaks.
Test door lock operation and interlock safety.
Check detergent drawer for blockages and clean if needed.
Inspect hoses (inlet and drain) for leaks, cracks, and secure connections.
Check water inlet valves function and visual flow rate.
Run test cycle – verify drum rotation, spin speeds, and quiet operation.
Inspect and clean pump filter (if accessible).
Confirm water heater is operational.
Check balance and suspension system (shock absorbers, springs).
Verify display, controls, and program selection functions.

Tumble Dryers

Tumble Dryer
Inspect door seal and latch.
Test interlock safety operation.
Clean lint filter and check airflow.
Inspect vent hose/ducting for damage (for vented models).
Check condenser unit (for condenser/heat pump models) and clean if necessary.
Inspect drum bushes where fitted.
Confirm drum rotation and belt condition.
Verify heater element or heat pump system heats correctly.
Inspect bearings for wear/noise.
Internal vacuum of any lint build up.

Built-in Electric Ovens

Integrated Oven
Check door seal and hinges.
Verify door glass integrity (no cracks, secure fit).
Inspect control knobs/touch panel.
Test oven light function.
Check heating elements (top, bottom, grill & fan) for correct operation.
Verify thermostat calibration (interval temperature test vs setpoint).
Inspect cavity and clean vents.
Check heating & cooling fans (where fitted).
Check condition of any fitted safety thermostats.
Inspect oven/grill selectors for proper function.

Freestanding Electric Cookers

Freestanding Cooker
All oven checks (as above).
Inspect hob plates/elements or ceramic/induction surface for cracks/damage.
Test hob elements heat and regulate correctly (where possible).
Inspect control knobs/switches for function and wear.
Check stability (anti-tip device fitted if applicable).
Verify internal light and timers.

Dishwashers

Dishwasher
Inspect door seal, hinges, and latch.
Test door interlock safety.
Check spray arms for free movement and blockages.
Inspect filters and sump for debris – clean if needed.
Test inlet valve operation and visual flow.
Inspect drain hose and pump operation.
Verify detergent dispenser and rinse aid function.
Confirm water heater is operational.
Run a test wash cycle – check filling, heating, washing, draining, and drying.
Check for normal pump/motor noises.
Inspect float switch/anti-flood system (where fitted).